Music/YamahaP120.md
... ...
@@ -0,0 +1,62 @@
1
+Make
2
+: Yamaha
3
+
4
+Model
5
+: P120
6
+
7
+Year
8
+: 2004
9
+
10
+
11
+# Disassembly
12
+
13
+1. Turn upside down and unscrew:
14
+ - Rear 9x metal bolts, standard-pitch
15
+ - 2 are longer than the others but this doesn't seem to matter
16
+ - LHS 4x metal bolts, wide-pitch
17
+ - RHS 3x metal bolts, wide-pitch
18
+ - **Leave secured**: Front 5x wood screws for the keyslip
19
+
20
+2. Turn back upwards:
21
+ - slide away the (wooden) facia board containing the control panel
22
+ - fasteners slide in keyhole brackets built in to the cheeks
23
+ - make sure the internal legs are clear of the base board
24
+ - tilt wooden facia board backwards leaving left and right cheeks in place
25
+ - left cheek is attached to base via ground wire
26
+
27
+4. Key servicing
28
+ - disconnect
29
+ - keyboard (8-pin?) data cable from control panel
30
+ - unscrew
31
+ - 1x black wood screw for ground wire from power circuits to base
32
+ - 1x black wood screw for right-hand cheek
33
+ - 9x brass bolts for keyboard
34
+ - 2x brass screws for keyboard
35
+ - slide keyboard back and lift out
36
+ - all keys have
37
+ - a metal tongue tensioner
38
+ - a greased front clip, rear clip and vertical post
39
+ - white keys
40
+ - locked in place with a plastic tongue on the underside of the keyboard
41
+ - black keys
42
+ - when the metal tongue is correctly in place they should spring back when pulled towards the player and released
43
+
44
+5. Keyboard servicing
45
+ - underside of keyboard has two linked circuit boards
46
+ - undo 9x (?) silver screws
47
+ - tilt circuit boards up and unclip
48
+ - orange silicon keypads
49
+ - 1x 5 key keypad (lowest notes)
50
+ - 6x 12 button (octave) keypads
51
+ - 1x 11 keypad
52
+ - when reassembling
53
+ - keypads must be aligned laterally over the contacts
54
+ - keypads must be aligned so the lip on the straight edge fits in to the plastic groove on the keyboard frame
55
+ - circuit board leading edges go *under* the clips
56
+
57
+6. Control panel servicing
58
+ - control panel should be placed upside down (otherwise the buttons fall out!)
59
+
60
+<!--
61
+vim: filetype=markdown
62
+-->