Music/YamahaP120.md
... ...
@@ -10,21 +10,21 @@ Year
10 10
11 11
# Disassembly
12 12
13
-1. Turn upside down and unscrew:
13
+## 1. Turn upside down and unscrew:
14 14
- Rear 9x metal bolts, standard-pitch
15 15
- 2 are longer than the others but this doesn't seem to matter
16 16
- LHS 4x metal bolts, wide-pitch
17 17
- RHS 3x metal bolts, wide-pitch
18 18
- **Leave secured**: Front 5x wood screws for the keyslip
19 19
20
-2. Turn back upwards:
20
+## 2. Turn back upwards:
21 21
- slide away the (wooden) facia board containing the control panel
22 22
- fasteners slide in keyhole brackets built in to the cheeks
23 23
- make sure the internal legs are clear of the base board
24 24
- tilt wooden facia board backwards leaving left and right cheeks in place
25 25
- left cheek is attached to base via ground wire
26 26
27
-4. Key servicing
27
+## 3. Key servicing
28 28
- disconnect
29 29
- keyboard (8-pin?) data cable from control panel
30 30
- unscrew
... ...
@@ -41,7 +41,7 @@ Year
41 41
- black keys
42 42
- when the metal tongue is correctly in place they should spring back when pulled towards the player and released
43 43
44
-5. Keyboard servicing
44
+## 4. Keyboard servicing
45 45
- underside of keyboard has two linked circuit boards
46 46
- undo 9x (?) silver screws
47 47
- tilt circuit boards up and unclip
... ...
@@ -54,7 +54,7 @@ Year
54 54
- keypads must be aligned so the lip on the straight edge fits in to the plastic groove on the keyboard frame
55 55
- circuit board leading edges go *under* the clips
56 56
57
-6. Control panel servicing
57
+## 5. Control panel servicing
58 58
- control panel should be placed upside down (otherwise the buttons fall out!)
59 59
60 60
<!--