Make : Huawei

Model : E3372h-153 (hilink) / K5160

Antenna Connector : 2x CRC9

Provider : Vodafone UK

Interface :

Protocols : LTE4 (150Mbps down, 50Mbps up), DC-HSPA+ (42Mbps)

Lock status : Locked

Specs : 4gltemall

Default IP : 192.168.9.1

USB Vendor ID : 0x12d1

USB Product ID : 0x157f (5503, cdc-ether, default for E3372h)

Alt Modes : 0x1f1e (7966, default for E3372s?) : 0x1592 (5522, mbim)

Purchased : Vodafone 2017-08-04

Activated : 2017-08-07

Configurations

See https://www.kernel.org/doc/Documentation/usb/proc_usb_info.txt

T:  Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 11 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=12d1 ProdID=157f Rev= 1.02
S:  Manufacturer=Vodafone (Huawei)
S:  Product=Vodafone (Huawei)
C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=  2mA
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=2ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Modes

From Juul on Github:

MBIM is just the NCM protocol + a signalling channel and QMI is just the ECM protocol + a signalling channel.

ECM is the Ethernet Control Model and NCM is the Network Control Model. ECM is an earlier standard and has some issues with latency while NCM resolves those issues and is designed for high speed operation.

MBIM mode

Hilink versions (E3372h) do not support MBIM mode.

Can switch by flashing E3372s firmware

Resources

Rooting

SideBar