Back to Hastur

Table of Contents

Debian installation

After mininst CD installation 

# vim /etc/apt/sources.list

#comment out cdrom entry
#deb cdrom:[....
#add multimedia repos
deb http://debian-multimedia.fx-services.com/ stable main
deb-src http://debian-multimedia.fx-services.com/ stable main
EOF
#

Configure network 

# ifdown eth0
# vim /etc/network/interfaces

#replace dhcp with static
#iface eth0 inet dhcp
iface eth0 inet static
    address $IP
    netmask $NETMASK
    gateway $GATEWAY_IP
EOF

# ifup eth0

Update, install SSH 

# apt-get install ssh
# apt-get install iproute
# apt-get install bzip2
# apt-get install hdparm

Install SSH keys 

hastur$ mkdir ~/.ssh
hastur$ chmod go-rwx ~/.ssh 
other$ scp ~/.ssh/authorized_keys me@hastur:~/.ssh/

Secure SSH Daemon 

# vim /etc/ssh/sshd_config
PermitRootLogin no
AllowUsers me
PasswordAuthentication No
EOF
# /etc/init.d/ssh restart

Serial Console

2007-10-02: Initial config 2013-10-31: Boot console, sulogin and fstab fixes

Configure serial console

Most serial console guides don't cover setting the serial console for fsck recovery at boot time.

When the fsck fails at boot sulogin is run (the prompt is 

"Enter root password or Ctrl-D to continue"

or similar) on the default console only (console or tty0).

sysvinit and /etc/inittab

Enable console on /dev/ttyS0 In /etc/inittab set

  • single user sulogin tty
  • z6 emergency fallthrough (if it exists)

  • getty on ttyS0

    ~~:S:wait:/sbin/sulogin /dev/ttyS0 ... z6:6:respawn:/sbin/sulogin /dev/ttyS0 ... T0:23:respawn:/sbin/getty -L ttyS0 115200 vt100

Set default console in sysvinit settings (/etc/default/rcS) 

CONSOLE=/dev/ttyS0

This is used through the init.d files when sulogin is called.

Allow root login 

# vim /etc/securetty
ttyS0

Test serial console 

# kill -s SIGHUP 1

All further work can now be completed over serial console and SSH.

Grub1

In /boot/grub/menu.lst:

  • Set serial config
  • Set terminal config
  • Append to the kernel kopt line (including the #)

e.g.: 

serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1
terminal console serial

Append kernel options for serial console to # kopt=root=... line e.g. 

# kopt=root=/dev/mapper/hastur-root ro console=ttyS0,115200n8 console=tty0

Grub2

In /etc/default/grub 

GRUB_CMDLINE_LINUX_DEFAULT="console=ttyS0,115200n8 console=tty0"
GRUB_CMDLINE_LINUX="console=ttyS0,115200n8 console=tty0"

# Uncomment to disable graphical terminal (grub-pc only)
GRUB_TERMINAL=serial
GRUB_SERIAL_COMMAND="serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1"

Then regenerate the config

grub-mkconfig

$[Get Code]62

fstab

To assist in avoiding unnecessary boot failures, ensure the fs_passno field in fstab is set connectly for all filesystems.

The sixth and final field in each fstab line determines whether and in which order the filesystem is checked at boot.

: Do not fsck

1 : Root filesystem

2-n : All other filesystems

Patch fstab to disable fsck of raid array started manually after boot 

-/dev/vg-md6/home        /mnt/md6-home   ext4    defaults,noatime,nosuid,noauto,acl      0       3
+/dev/vg-md6/home        /mnt/md6-home   ext4    defaults,noatime,nosuid,noauto,acl      0       0

Kernel Customization

Install kernel build tools 

# apt-get install kernel-package ncurses-dev fakeroot wget bzip2

Get and extract kernel source and Tejun's libata patch 

$ wget http://home-tj.org/files/libata-tj-stable/libata-tj-2.6.22.1-20070808.tar.bz2
$ wget http://www.eu.kernel.org/pub/linux/kernel/v2.6/linux-2.6.22.1.tar.bz2
$ tar -xjvf linux-2.6.22.1.tar.bz2
$ tar -xjvf libata-tj-2.6.22.1-20070808.tar.bz2

Kernel Config

CONFIG_MCORE2=y # set in place of generic x86_64
CONFIG_NR_CPUS=4 # set in place of 32 to save memory

Patch and configure kernel 

$ cd linux-2.6.22.1
$ cp /boot/config-2.6.18-5-amd64 linux-2.6.22.1/.config
$ make oldconfig
$ patch -p1 < ../libata-tj-2.6.22.1-20070808/combined.patch
$ make menuconfig # check config
$ export CONCURRENCY_LEVEL=4 # Quad-core, don't use -j
$ make-kpkg clean
$ fakeroot make-kpkg --initrd --revision=libata.1.0 kernel_image

Needs the --initrd to generate an initrd image for booting from LVM

Install kernel 

# dpkg -i linux-image-2.6.22.1-pmp_libata.1.0_amd64.deb

Updates GRUB automagically

Module Autoloading

Load DVB module for Hauppauge Nova-T 

# echo "cx88_dvb  # DVB support for Hauppauge Nova-T" >> /etc/modules

Cross Compiler

(Don't remember why I needed this)

RAID Configuration

2007-10-03

Create test RAID array 

# apt-get install mdadm xfsprogs bonnie++
# for dev in {b..g} ; do echo ",125,fd" | sfdisk /dev/sd$dev ; done
# mdadm --create --verbose /dev/md0 --level=0 --raid-devices=6 /dev/sd{b..g}1

Partition the disks 

# cat > sfdisk.format
,125,fd
,12450,fd
,,fd
EOF
# for dev in {b..g} ; do cat sfdisk.format | sfdisk /dev/sd$dev ; done

Create RAID0 for swap 

# mdadm --create --verbose /dev/md0 --level=0 --raid-devices=6 /dev/sd{b..g}1
# mkswap /dev/md0
# swapon /dev/md0 -p0

Create RAID10 for database 

# mdadm --create --verbose /dev/md1 --level=10 --raid-devices=6 /dev/sd{b..g}2
# mkfs.xfs -f /dev/md1

Create RAID5 for general data 

# mdadm --create --verbose /dev/md5 --level=5 --raid-devices=5 --spare-devices=1 /dev/sd{b..g}3
# mkfs.xfs -f /dev/md5

Install SMART mon 

# apt-get install smartmontools

Tested various RAID configurations. Seems /dev/sdc is broken.

RAID Benchmarks

  • http://linux-ata.org/faq.html - setting and checking NCQ

  • md0, raid 0, 6 disks

  • md1, raid 10, 6 disks, stripe of 3 mirrored pairs
  • md5, raid 5, 5 disks + 1 hot spare

Setup: 4 Seagate, 2 Samsung. XFS with default options. 2.6.22.1. NCQ 31/32. SATA PM through 2 SATA300 channels. 3 disks multiplexed per channel.

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Test | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | md0 | 4024M |   |   | 160706 | 15 | 67128 | 7 |   |   | 116615 | 6 | 392.9 | | | md1 | 4024M |   |   | 80089 | 10 | 53176 | 6 |   |   | 117342 | 7 | 166.1 | | | md5 | 4024M |   |   | 55785 | 8 | 34142 | 4 |   |   | 82070 | 5 | 318.3 | |

Then md5 with varying NCQ depths 

# for depth 1 8 31; do
    for dev in {b..g} ; do
      echo $depth > /sys/block/sd$dev/device/queue_depth;
    done;
    bonnie++ -f -d /mnt/md5 -s 4024 -n 0 -u root | tee ~/bonnie.raid5.ncq=$depth.out;
  done

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Test | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | depth=1 | 4024M |   |   | 60390 | 9 | 33056 | 3 |   |   | 73552 | 4 | 311.3 | | | depth=8 | 4024M |   |   | 53196 | 8 | 33107 | 3 |   |   | 83029 | 5 | 311.4 | | | depth=31 | 4024M |   |   | 52550 | 8 | 34127 | 4 |   |   | 81684 | 4 | 306.5 | |

Without PM

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Test | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | md0 | 4024M |   |   | 352560 | 33 | 154813 | 19 |   |   | 315842 | 19 | 669.9 | 1 | | md1 | 4024M |   |   | 222888 | 31 | 72417 | 9 |   |   | 170133 | 12 | 776.2 | 1 | | md5 | 4024M |   |   | 171088 | 28 | 68525 | 9 |   |   | 271605 | 20 | 641.8 | |

2007-10-09

Finish RAID configuration

Optimize 

# blockdev --setra 4096 /dev/md0 # default 1536
# blockdev --setra 3072 /dev/md1 # default 768
# blockdev --setra   /dev/md5 #

Deprecated. Proper read-ahead testing done later. References suggest optimal config is 0 on all layers except the top-layer (dmcrypt).

Post-optimization benchmarks

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Test | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | md0 | 4024M |   |   | 188582 | 18 | 86119 | 10 |   |   | 179046 | 10 | 481.6 | | | md1 | 4024M |   |   | 95734 | 12 | 49719 | 6 |   |   | 127244 | 7 | 482.1 | | | md5 | 4024M |   |   |   |   |   |   |   |   |   |   |   |   |

Now rearrange md0 to alternate PMs 

# mdadm --stop /dev/md{0,1,5}
# mdadm --create --verbose /dev/md0 --level=0 --raid-devices=6 /dev/sd{b,e,c,f,d,g}1
# mdadm --create --verbose /dev/md1 --level=10 --raid-devices=6 /dev/sd{b,e,c,f,d,g}2

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Test | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | md0 | 4024M |   |   | 192926 | 18 | 86918 | 11 |   |   | 180066 | 11 | 470.8 | | | md1 | 4024M |   |   | 97683 | 12 | 50525 | 6 |   |   | 120018 | 8 | 480.4 | | | md5 | 4024M |   |   |   |   |   |   |   |   |   |   |   |   |

Or alternately 

# mdadm --create --verbose /dev/md1 --level=10 --raid-devices=6 /dev/sd{b,d,f,c,e,g}2

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Test | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | md1 | 4024M |   |   | 96439 | 12 | 50751 | 6 |   |   | 118106 | 7 | 463.7 | |

Save to mdadm.conf

Disk Encryption

# apt-get install dmsetup

Filesystem Using /dev/md0 to test on 

# time dd if=/dev/urandom of=/dev/md0 bs=10240k
real    16m23.806s
user    0m0.004s
sys     15m40.363s

# apt-get install cryptsetup hashalot

Create the encrypted partition 

# cryptsetup --verbose --verify-passphrase luksFormat /dev/md0

WARNING!
========
This will overwrite data on /dev/md0 irrevocably.

Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase: not my real passphrase
Verify passphrase: not my real passphrase
Command successful.

Now open it 

# cryptsetup luksOpen /dev/md0 crypt-md0
Enter LUKS passphrase: not my real passphrase
key slot 0 unlocked.
Command successful.

Create a filesystem, mount it 

# mkfs.xfs /dev/mapper/crypt-md0
# mount /dev/mapper/crypt-md0 /mnt/md0




# bonnie++ -f -d /mnt/md0 -s 4024 -n 0 -u root

Clean up 

# umount /mnt/md0
# cryptsetup luksClose crypt-md0

aes-x86_64 - load the module 

# rmmod aes
# modprobe aes-x86_64

Setup and Benchmark 

# cryptsetup -c aes-cbc-essiv:sha256 luksFormat /dev/md0
# cryptsetup luksOpen /dev/md0 crypt-md0
# mkfs.xfs /dev/mapper/crypt-md0
# mount /dev/mapper/crypt-md0 md0
# bonnie++ -f -d /mnt/md0 -s 4024 -n 0 -u root
# umount /mnt/md0
# cryptsetup luksClose crypt-md0

Next, try experimental LRW block mode 

# modprobe lrw
# cryptsetup -c aes-lrw-benbi:sha256 -s 256 luksFormat /dev/md0
# cryptsetup luksOpen /dev/md0 crypt-md0
# mkfs.xfs /dev/mapper/crypt-md0
# mount /dev/mapper/crypt-md0 md0
# bonnie++ -f -d /mnt/md0 -s 4024 -n 0 -u root
# umount /mnt/md0
# cryptsetup luksClose crypt-md0

For twofish: 

# cryptsetup -c twofish-cbc-essiv:sha256 luksFormat /dev/md0
# cryptsetup luksOpen /dev/md0 crypt-md0
# mkfs.xfs /dev/mapper/crypt-md0
# mount /dev/mapper/crypt-md0 md0
# bonnie++ -f -d /mnt/md0 -s 4024 -n 0 -u root
# umount /mnt/md0
# cryptsetup luksClose crypt-md0

Twofish-x86_64 - load the module 

# rmmod twofish
# modprobe twofish-x86_64

Setup and Benchmark 

# cryptsetup -c twofish-cbc-essiv:sha256 luksFormat /dev/md0
# cryptsetup luksOpen /dev/md0 crypt-md0
# mkfs.xfs /dev/mapper/crypt-md0
# mount /dev/mapper/crypt-md0 md0
# bonnie++ -f -d /mnt/md0 -s 4024 -n 0 -u root
# umount /mnt/md0
# cryptsetup luksClose crypt-md0

Encryption Benchmarks

md0, XFS

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Test | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | aes1 | 4024M |   |   | 169349 | 17 | 46817 | 8 |   |   | 114262 | 13 | 394.4 | | | aes-642 | 4024M |   |   | 163673 | 17 | 46350 | 8 |   |   | 115287 | 13 | 398.4 | | | aes-lrw-643 | 4024M |   |   | 174988 | 18 | 49748 | 9 |   |   | 115869 | 13 | 400.7 | | | twofish4 | 4024M |   |   | 140027 | 14 | 40582 | 7 |   |   | 109515 | 12 | 368.4 | | | twofish-645 | 4024M |   |   | 159518 | 16 | 43404 | 7 |   |   | 112616 | 13 | 403.9 | |

 

1 aes-cbc-essiv:sha256 128-bit key ⇑

2 aes-cbc-essiv:sha256, 128-bit key, 64-bit ⇑

3 aes-lrw-benbi:sha256, 256-bit key, 64-bit ⇑

4 twofish-cbc-essiv:sha256 128-bit key ⇑

5 twofish-cbc-essiv:sha256, 128-bit key, 64-bit ⇑

RAID Configuration - Take 2

Random data

# for dev in /dev/sd{b..g} ; do dd if=/dev/urandom of=$dev bs=1024k &  done

With port multipliers, may be faster this way: 

# for dev in /dev/sd{b..d} ; do dd if=/dev/urandom of=$dev bs=1024k ;  done &
# for dev in /dev/sd{e..g} ; do dd if=/dev/urandom of=$dev bs=1024k ;  done &

Get progress reports: 

# # set delay, finished flag, get current tty device
# delay=3 ; finished=0; tty=`tty | cut -d/ -f3-`
# # get progress reports from dd
# while (( ! $finished )) ; do pkill -USR1 -t $tty dd ; finished=$? ; sleep $delay ; done

Much faster to do this in parallel on the raw disks, not through the raid devices.

To kill the dd's: 

# pkill -t $tty dd

Partition

2007-10-12

Then

  • Repartition
  • Recreate raid arrays

Partitioning scheme:

Seagate 500GB = 500106780160 bytes = 476938.9917 MiB = 465.760734 GiB Samsung 500GB = 500107862016 bytes = 476940.0234 MiB = 465.761742 GiB

md Start End Blocks Raid Size Partition Notes
md0 0M 749M   4.5GB Swap Separate so crypto can be random
md2 750M 50G   300GB RAID0 /var,/tmp
md3 50G 465G   1660GB RAID5 Everything else

Partition the disks, use sfdisk MiB format 

# cat > sfdisk.format
,750,fd
,51200,fd
,,fd
EOF
# for dev in {b..g} ; do cat sfdisk.format | sfdisk -uM /dev/sd$dev ; done

md0 - RAID0 - swap

Create RAID0 for swap 

# mdadm --create --metadata=1.2 --verbose --level=0 --raid-devices=6 /dev/md0 /dev/sd{b..g}1

Edit /etc/crypttab and /etc/fstab 

# echo "/dev/mapper/md0-swap    /dev/md0        /dev/random     swap" >> /etc/crypttab
# echo "/dev/mapper/md0-swap    none    swap    sw      0       0" >> /etc/fstab

Do first initialization manually 

# cryptsetup -s 128 create --key-file /dev/random md0-swap /dev/md0
# mkswap /dev/mapper/md0-swap
# swapon /dev/mapper/md0-swap -p0 # set higher priority

Don't think chunk size matters for RAID0. RAID5 must be carefully tuned however.

md2 - RAID0

Create RAID0 for general use 

# mdadm --create --metadata=1.2 --verbose --level=0 --raid-devices=6 /dev/md2 /dev/sd{b..g}2
# cryptsetup -c aes-lrw-benbi:sha256 -s 256 luksFormat /dev/md2

WARNING!
========
This will overwrite data on /dev/md2 irrevocably.

Are you sure? (Type uppercase yes): YES
Enter LUKS passphrase: (enter short password, for testing)

The passphrase is only for testing chunk-size performance. Later, we'll remove the passphrase and replace it with random key material stored on a USB token.

Edit /etc/crypttab and /etc/fstab 

# echo "/dev/mapper/crypt-md2   /dev/md2    none    luks" >> /etc/crypttab
# echo "/dev/mapper/crypt-md2   /mnt/md2    xfs defaults,noatime,noexec,noauto  0   3" >> /etc/fstab




# cryptsetup luksOpen /dev/md2 crypt-md2
# mkfs.xfs -f -d sunit=16,swidth=96 /dev/mapper/crypt-md2
# mount -t xfs /dev/mapper/crypt-md2 /mnt/md2
# bonnie++ -f -d /mnt/md2 -s 4024 -n 0 -u root

swidth = sunit × num-raid-devices

Chunk size benchmarks

Cleanup 

# umount /mnt/md2
# cryptsetup luksClose crypt-md2
# mdadm --stop /dev/md2

Chunk size 

# mdadm --create --metadata=1.2 --verbose --chunk 128 --level=0 --raid-devices=6 /dev/md2 /dev/sd{b..g}2
# cryptsetup -c aes-lrw-benbi:sha256 -s 256 luksFormat /dev/md2
# cryptsetup luksOpen /dev/md2 crypt-md2
# mkfs.xfs -f -d sunit=16,swidth=96 /dev/mapper/crypt-md2
# mount -t xfs /dev/mapper/crypt-md2 /mnt/md2
# bonnie++ -f -d /mnt/md2 -s 4024 -n 0 -u root

etc...

RAID0

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Chunk-size | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | 64 | 4024M |   |   | 166964 | 18 | 48156 | 9 |   |   | 112035 | 13 | 369.9 | | | 128 | 4024M |   |   | 170101 | 18 | 44732 | 9 |   |   | 93034 | 11 | 388.1 | | | 256 | 4024M |   |   | 168815 | 18 | 43214 | 8 |   |   | 89604 | 10 | 410.9 | |

Stick to 64k chunk size.

md3 - RAID5

Create RAID5 for general use

  • Test various chunk sizes

    mdadm --create --metadata=1.2 --verbose --chunk 128 --level=5 --raid-devices=5 --spare-devices=1 /dev/md3 /dev/sd{b..g}3

    cryptsetup -c aes-lrw-benbi:sha256 -s 256 luksFormat /dev/md3

    cryptsetup luksOpen /dev/md3 crypt-md3

    mkfs.xfs -f -d sunit=128,swidth=640 /dev/mapper/crypt-md3

    mount -t xfs /dev/mapper/crypt-md3 /mnt/md3

    bonnie++ -f -d /mnt/md3 -s 4024 -n 0 -u root

swidth = sunit × num-raid-devices

Edit /etc/crypttab and /etc/fstab 

# echo "/dev/mapper/crypt-md3   /dev/md3    none    luks" >> /etc/crypttab
# echo "/dev/mapper/crypt-md3   /mnt/md3    xfs defaults,noatime,noexec,noauto  0   3" >> /etc/fstab

sunit and swidth

mkfs.xfs can't work out sunit and swidth from a dmcrypt device. So run mkfs.xfs on the md device first and use the values it calculates there when running mkfs.xfs on the dmcrypt device. 

# mkfs.xfs -f /dev/md3
meta-data=/dev/md3               isize=256    agcount=32, agsize=13599264 blks
         =                       sectsz=4096  attr=0
data     =                       bsize=4096   blocks=435176448, imaxpct=25
         =                       sunit=16     swidth=80 blks, unwritten=1
naming   =version 2              bsize=4096  
log      =internal log           bsize=4096   blocks=32768, version=2
         =                       sectsz=4096  sunit=1 blks
realtime =none                   extsz=327680 blocks=0, rtextents=0

Note that the log size is 128MB. ( bsize × blocks = 4K × 32×2^10 = 128M)

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | Chunk-size | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | 64 | 4024M |   |   | 50391 | 7 | 28868 | 6 |   |   | 88188 | 11 | 302.0 | | | 128 | 4024M |   |   | 45829 | 6 | 28207 | 5 |   |   | 77503 | 9 | 294.1 | | | 256 | 4024M |   |   | 37982 | 5 | 27898 | 5 |   |   | 70849 | 9 | 313.4 | |

Readahead and stripe cache size

Chunk=256

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | RA1 | SC2 | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | 256 | xxx | 4024M |   |   | 36932 | 5 | 28244 | 6 |   |   | 69821 | 8 | 300.9 | | | 4096 | xxx | 4024M |   |   | 36161 | 5 | 28999 | 4 |   |   | 111310 | 11 | 306.8 | | | 4096 | 4096 | 4024M |   |   | 76893 | 11 | 40381 | 6 |   |   | 111537 | 10 | 282.5 | |

Chunk=64

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | RA | SC | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | 4096 | 4096 |

Here I got fed up with PM and directly connected the drives. 

# mkfs.xfs -f -d sunit=16,swidth=80 /dev/mapper/crypt-md3

chunk=64, bsize=4k, sunit=16, swidth=80

| Version 1.03 | Sequential Output | Sequential Input | Random | || |   | Per Chr | Block | Rewrite | Per Chr | Block | Seeks | | RA | SC | Size | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | K/sec | %CP | /sec | %CP | | 4096 | 4096 | 4024M |   |   | 196838 | 26 | 73407 | 11 |   |   | 238919 | 22 | 402.0 | |

 

1 read-ahead ⇑

2 stripe cache size ⇑

echo 4096 > /sys/block/md3/md/stripe_cache_size

/dev/sdc died during benchmarking so: 

# mdadm --create --metadata=1.2 --verbose --chunk 128 --level=5 --raid-devices=5  /dev/md3 /dev/sd{b,d,e,f,g}3
# cryptsetup -c aes-lrw-benbi:sha256 -s 256 luksFormat /dev/md3
# cryptsetup luksOpen /dev/md3 crypt-md3
# mkfs.xfs -f -d sunit=128,swidth=640 /dev/mapper/crypt-md3
# mount -t xfs /dev/mapper/crypt-md3 /mnt/md3

Limit rebuild speed (KiB/sec) 

# echo 1000 > /proc/sys/dev/raid/speed_limit_min
# echo 20000 > /proc/sys/dev/raid/speed_limit_max

Save dmraid configuration so far 

# mdadm --detail --scan --verbose >> /etc/mdadm/mdadm.conf

Shutdown 

# umount /mnt/md2 /mnt/md3
# swapoff /dev/mapper/md0-swap
# cryptsetup remove md0-swap
# cryptsetup remove crypt-md2
# cryptsetup remove crypt-md3
# mdadm --stop /dev/md*

PM RAID take 2

2007-11-30

  • Added a SiI3132 PCIe controller. Should exhibit 130mbit bandwidth limit.
  • Only 5 disks working now so have to force bonnie++ to run with < 2×RAM.

Benchmark RAID0

# mdadm --create --metadata=1.2 --verbose --level=0 --raid-devices=6 /dev/md0 /dev/sd{b..g}1
# cryptsetup -c aes-lrw-benbi:sha256 -s 256 luksFormat /dev/md0
# cryptsetup luksOpen /dev/md0 crypt-md0
# mkfs.xfs -f -d sunit=16,swidth=96 /dev/mapper/crypt-md0
# mount -t xfs /dev/mapper/crypt-md0 /mnt/md0
# for dev in sd{b..f} ; do blockdev --setra 128 /dev/$dev ; done
# blockdev --setra 128 /dev/md0
# blockdev --setra 8192 /dev/mapper/crypt-md0
# bonnie++ -f -d /mnt/md0 -r 1800 -s 3700 -n 0 -u root

Backports

Performance Tweaks

Tweak RAID array parameters in rc.local

# vim rc.local 

# Configure RAID
DEVICES="sda sdb sdc sdd sde sdf"

# disable NCQ
for dev in $DEVICES ; do
  echo 1 > /sys/block/$dev/device/queue_depth;
done;

# set read-ahead
for dev in $DEVICES ; do
  blockdev --setra 128 /dev/$dev
done
blockdev --setra 128 /dev/md{0,2,3}
blockdev --setra 8192 /dev/mapper/md0-swap /dev/mapper/crypt-md{2,3}

# set stripe_cache_size
echo 8192 > /sys/block/md3/md/stripe_cache_size

exit 0

Have to fix detecting the devices. May not always be sd{a..f}

Boot probe order

  • sata_sil24 gets probed before pata_jmicron so can't boot with RAID array attached.

    • Solution: remove sata_sil24 from initramfs

  1. Put just the needed modules in the initramfs vim /etc/initramfs-tools/initramfs.conf MODULES=dep

  2. Unload sata_sil24 # cryptsetup luksClose /dev/mapper/crypt-md3 # mdadm --stop /dev/md3 # rmmod sata_sil24

  3. Recreate initramfs # mkinitramfs -k 2.6.25-pmp -o /boot/initrd.img-2.6.25-pmp

Replacement HDD

2008-08-06 - Finally RMA'd the faulty Samsung HDD.

Initialize new disk

# badblocks -c 10240 -s -w -t random -o sdg.new.badblocks.out -v /dev/sdg

Partition and add to RAID

# cat sfdisk.format | sfdisk -uM /dev/sdg
# mdadm /dev/md3 --add /dev/sdg3

Limit rebuild speed

In KiB/sec: 

# echo 1000 > /proc/sys/dev/raid/speed_limit_min
# echo 20000 > /proc/sys/dev/raid/speed_limit_max

Grow array from 5+1 to 6

# mdadm --grow /dev/md3 --raid-devices=6 --backup-file=/var/tmp/raidresize

Expand LUKS partition

# cryptsetup resize crypt-md3

Expand XFS

# xfs_growfs /mnt/md3

Process Limits

  • Set limits to prevent processes like lsdvd killing the system when freaking out on dodgy ISOs

    cat >> /etc/profile

    if [ $UID -ge 1000 ] then ulimit -m 1000000 # Max resident memory 1GB ulimit -v 1000000 # Max virtual memory 1GB ulimit -u 150 # Max processes 150 fi

ATA Hard Resets

  • Started getting ATA hard resets
  • At or around the same time:
    • the power supply on DGS-1008D switch died
    • bad interference on digital TV and cellphone conversations was noticed
  • Narrowed it down to one enclosure slot
    • Could be a power supply problem?
    • Cable problem?
  • See HasturAtaFailures

Monitor RAID

Configure cron

Monitors the array every 20 minutes 

$ crontab -e
0,20,40 * * * * /sbin/mdadm --monitor --oneshot --mail yourname@yourisp

Upgrade to Lenny

2009-05-13

  • Replaced all occurrences of stable and etch with lenny
  • apt-get update && apt-get dist-upgrade
  • /boot was mounted ro, had to remount and retry upgrade

Recover RAID after failed disks

Boot Reconfiguration

2009-09-09

Disable boot-time serial console

  • Edit /boot/grub/menu.lst
  • Edit inittab

2009-09-13

  • Turn serial console back on but give precedence to console

    serial --unit=0 --speed=115200 --word=8 --parity=no --stop=1 terminal console serial

Don't start cryptdisks on boot

  • sysv-rc-conf: disabled cryptdisks, cryptdisks-early

Recover RAID again

2009-09-10

md2

mdadm --create --assume-clean --metadata=1.2 --verbose --level=0 --raid-devices=6 /dev/md2 /dev/sd{e,f,g,b,c,d}2

md3

mdadm-2.5.6 -C --assume-clean -f -e 1.2 -l 5 -c 128 -n6 /dev/md3 /dev/sd{b,g,d,c,f,e}3

Move mounted home

2009-09-10

# mv /mnt/md3/systems/hastur/home /mnt/md3/home
# cd /mnt/md3/systems/hastur && ln -s ../../home

Kernel Upgrade

2009-09-16

  • To 2.6.31

    dpkg -i /usr/src/linux-image-2.6.31-pmp_hastur.1.0_amd64.deb

Array Upgrade

Extend Logical Volumes

# lvextend -L +100G /dev/vg-md6/home
# lvextend -L +300G /dev/vg-md6/media
# resize2fs /dev/vg-md6/home &
# resize2fs /dev/vg-md6/media &

Prepare Backup Disks

# Create mdadm raid 1 with metadata at the end
mdadm --create /dev/md5 -e 1 --level=1 --raid-devices=2 /dev/sdg /dev/sdh
# resync
mdadm --readwrite /dev/md5
# init LUKS, keysize (-s) is required for aes-xts-plain
cryptsetup luksFormat  -c aes-xts-plain -s 512 /dev/md5
# filesystem
mkfs.ext3 -m0 /dev/md5
  • copy
  • prep for shipping

Array Upgrade 2

Upgrade to Squeeze

2012-11-05

Followed howtoforge.

  • Backed up /etc tar -czvf /mnt/md6-media/systems/etc.tgz /etc

  • Found Lenny archive at: http://ftp.de.debian.org/debian-archive/debian

    apt-get clean # running out of space on /var apt-get update # update old distro apt-get upgrade # upgrade old distro

Upgrade incomplete. Still on Lenny.

/boot was mounted ro, had to remount and retry upgrade.

2013-10-30

  • Reattempted upgrade

Kernel

Following Debian manual

  • apt-get upgrade

    apt-get install linux-image-2.6-amd64

    fails out of space on /lib!

Out of space in /lib

  • Reconfigure sshd to allow root login temporarily
  • ssh in as root

  • Resize hastur-home LVM

    • Reduce fs to 50G, reduce lv to 52G, expand fs again to fill lv

    umount /home HOME_DEV=/dev/mapper/hastur-home e2fsck -f $HOME_DEV resize2fs $HOME_DEV 50G e2fsck -f $HOME_DEV lvreduce -L 52G $HOME_DEV resize2fs $HOME_DEV

    Extend home-root by 512GB, leave the rest unused

    ROOT_DEV=/dev/mapper/hastur-root lvextend -L +512M $ROOT_DEV resize2fs $ROOT_DEV

    Redo kernel upgrade

    apt-get -f install

udev

  • Problem with libc6-i386 dependencies related to transition to multiarch.

    • Solution: Removed ia32-libs and all dependents. Removed libc6-i386

    apt-get remove dpt-i2o-raidutils dpkg --remove lib32asound2 lib32gcc1 lib32ncurses5 lib32stdc++6 lib32z1 lib32z1-dev libc6-dev-i386 libc6-i386

    resume udev install (with some deps including gcc4.4-base)

    apt-get install udev

dist-upgrade

apt-get upgrade
apt-get dist-upgrade  # fails with perl libanyevent problems
# check anyevent-perl deps
apt-cache showpkg anyevent-perl  # none!
dpkg -r anyevent-perl
apt-get install -f   # fix the packages that anyevent-perl broke

mediatomb

# backup
/etc/init.d/mediatomb stop
cd /etc
tar -czvf mediatomb.tgz mediatomb/
# remove
apt-get purge mediatomb mediatomb-common mediatomb-daemon
rm -rf /etc/mediatomb
apt-get install mediatomb-daemon
# extract backup and merge configs
cd /etc/mediatomb
tar -xzvf /etc/mediatomb.tgz
mv mediatomb old
vimdiff config.xml old/config.xml
# restart
/etc/init.d/mediatomb restart

Switch postgresql

# Stop and backup
/etc/init.d/postgresql stop
tar -czvf 8.3.bak.tgz /etc/postgresql/8.3 /var/lib/postgresql/8.3
tar -czvf 8.4.bak.tgz /etc/postgresql/8.4 /var/lib/postgresql/8.4
# Drop default 8.4 cluster
/etc/init.d/postgresql start
pg_dropcluster --stop 8.4 main
# Upgrade 8.3 to 8.4
pg_upgradecluster 8.3 main
pg_dropcluster --stop 8.3 main

Upgrade to Wheezy

'2013-10-31'

Preparation

  • install etckeeper and baseline

    apt-get install etckeeper cd /etc etckeeper init

    check the git staging area and remove unwanted stuff

    git commit -a -m "etc: squeeze baseline" git tag -a -m "squeeze"

  • updated apt-sources

  • Check estimated space and extend /var by 2GB

    apt-get -o APT::Get::Trivial-Only=true dist-upgrade lvextend /dev/mapper/hastur-var -L +2G resize2fs /dev/mapper/hastur-var

  • keep polipo

  • apt-get autoremove

Upgrade

Minimal upgrade first

  • apt-get upgrade

Lots of fixes dist-upgrades, apt-get -f installs, etc.

Breakages from:

  • vlc and libav
    • apt-get removed vlc and continued, later reinstalled

Removed old custom-built kernels.

Removed custom install of rtorrent now that Wheezy has an up-to-date one.

Fixed md127 mdadm device in /etc/mdadm/mdadm.conf 

ARRAY /dev/md6 UUID=<array:uuid>

Migrate to rsyslogd

sudo apt-get install rsyslog
sudo apt-get purge inetutils-syslogd

Fix Cacti

Cacti node tree UI wasn't working at all. Missing js library jquery-cookie

apt-get install libjs-jquery-cookie

$[Get Code]104

Remaining Issues

  • Mythbackend broken
  • Cacti tree ui broken

Log

2011-07-09

  • Extended md6-media by 100G

2013-10-30

  • Completed upgrade to Squeeze

2013-10-31

  • Upgraded to Wheezy
  1. vim:set syntax=pmwiki:

SideBar