Web Service
URL : myolive.co.uk
Open ports : 80, 443
Box Contents
- Olive Smart Sensor
- Olive Smart Hub
- USB plug
- Adjustable antenna
- Ethernet cable
- USB cable
- Instruction leaflet
Olive Smart Sensor
-
TEK377 sensor
- 433.92MHz Framed FSK rtl_433
- Easy installation
- Cannot replace the battery without voiding warranty
Battery : CR2430, 3V. (Though a CR2032 will fit too.)
Reed Switch
- the reed switch activates rebinding with the hub
Olive Smart Hub
- TEK608 modem
- Antenna mount (type?)
- USB power
- RJ45 ethernet socket
Manufacturer : Tekelek Europe
Model : TEK608A Broadband gateway
Open Ports : 80 (http)
Web Interface
Uses the microchip TCP/IP stack and mchp.js
Microchip javascript library
unitstatus.xml
(Status of the modem connection, 0:OK)
<response>
<connection_stat>0</connection_stat>
</response>
rfstatus.xml
(Status of each sensor connection, 0:OK, 2:Unknown)
<response>
<s1>%d</s1>
<s2>%d</s2>
<s3>%d</s3>
<s4>%d</s4>
</response>
pairstatus.xml
(Pairing status for the setup wizard)
diag.htm
has the raw data from each sensor. oilpal watchman
See github:markferry/tekelek-scraper
Indicator LEDs
Orange : Power On
Green : Data activity
Red : Error code (sequence of flashes)
Antenna
Type :
Frequency : 433MHz?
Error Codes
4 flashes : uplink failure
SoC
PIC
18F27J13 -I/ML 15387BA
Pins : 28
PROM : 128KB
SRAM : 3760B
Remappable pins : 19
Timers 8-bit : 4
Timers 16-bit : 4
ECCP/CCP : 3/7
EUSART : 2
MSSP1 SPI w/DMA : 2, Y
MSSP I2C : Y
A/D 12-bit (ch) : 10
Comparators : 3
Deep Sleep : Y
PMP2/PSP : N
CMTU3 : Y
RTCC4 : Y
1 Master synchronous serial port ⇑
2 Parallel master port ⇑
3 Charge Time Measurement Unit ⇑
4 Realtime Clock and Calendar ⇑
Radio
Si4330 BPS17E . 1515
Part Number : Si4330
Type : RX
Modulation Scheme (max kbps) FSK / OOK : 256 / 40
Frequency Range (MHz) : 240-960
Output Power Range (dBm) : -
Sensitivity (dBm) 2.0 kbps FSK / 4.8 kbps OOK : -121 / -110
RX current (mA) : 18.5
TX current (mA) : -
Package : QFN20
SPI Flash
SST25VF040B 80-41-S2AE 1537WC7-B
Ethernet Controller
ENC28J60 -I/ML 1512UPE